Axiohm APOS PRINTER SERIES Uživatelský manuál stáhnout pdf (Strana 29)

APOS KANJI User Manual Page 29 / 45

Ref : 3103039-FDE Issue A

4.1.26. ESC m

(Description) Perform partial cut

(Format) <1Bh> <6Dh> <n>

(Comments) The command is valid only when a cutter is fitted.

(Cross reference) ESC i

4.1.27. AX C

(Description) Select cut position

(Format) <1Fh> <43h> <n>

(Comments) If n = 0, cut command will cut under last printed line.

If n = 1, cut command will cut over last printed line.

0 <= n <= 1

Default value is n = 1

(Cross reference) ESC i, ESC m

4.1.28. GS w

(Description) Set horizontal magnification of bar code

(Format) <1Dh> <77h> <n>

(Comments) n defines how many 1/6mm units are used to print the thin line of each

barcode symbology. The thick lines will be set to twice the value of n.

2 <= n <= 4

Default value is n = 3

(Cross reference) GS h, GS k

4.1.29. GS h

(Description) Select vertical height of bar code

(Format) <1Dh> <68h> <n>

(Comments) The vertical height will be set to n 1/8 mm units.

1 <= n <= 255

Default value is n = 162

(Cross reference) GS k, GS w

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Žádné komentáře

Axiohm APOS PRINTER SERIES Uživatelský manuál Strana 29